Reference Guide

561 | show ap debug bss-stats Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
show ap debug bss-stats
show ap debug bss-stats [bssid <bssid>]
Description
Show debug and troubleshooting statistics from a specific BSSID of an AP.
Syntax
Examples
The example below shows part of the output of the command show ap debug bss-stats bssid <bssid>.
The output of this command includes the following information:
Parameter Description
bssid <bssid> Show data for a specific Basic Service Set Identifier (BSSID) on an AP. An AP’s BSSID is
usually the AP’s MAC address.
Parameter Description
Frames Rcvd For TX Number of frames received for transmission.
Tx Frames Dropped Number of transmission frames that were dropped.
Frames Transmitted Number of frames successfully transmitted.
Success With Retry Number of frames that were transmitted after being retried.
Tx Mgmt Frames Number of management frames transmitted.
Beacons Transmitted Number of beacons transmitted.
(host) #show ap debug bss-stats bssid 00:1a:1e:11:5f:11
BSSID Stats
-----------
Parameter Value
--------- -----
------------------- General Per-radio Statistics
------------------- Transmit specific Statistics
Frames Rcvd For TX 4263
Tx Frames Dropped 613
Frames Transmitted 3650
Success With Retry 0
Tx Mgmt Frames 451975
Beacons Transmitted 447712
Tx Probe Responses 4263
Tx Data Frames 0
Multicast Data 0
Tx CTS Frames 0
Dropped After Retry 613
Dropped No Buffer 0
Missed ACKs 613
Long Preamble 4263
Short Preamble 0
Tx EAPOL Frames 0
Tx 6 Mbps 3650
Tx WMM [VO] 4263