Reference Guide

Table Of Contents

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show ap mesh topology | 628

Command History

Command Information

RSSI The Receive Signal Strength Indicator (RSSI) value displayed in the output of this command

represents signal strength as a signal to noise ratio. For example, a value of 30 would indicate

that the power of the received signal is 30 dBm above the signal noise threshold.

Rate Tx/Rx The rate, in Mbps, that a mesh point transmits and receives at on its uplink. Note that the rate

information is only as current as indicated in the Last Update column.

Last Update Time elapsed since the mesh node last updated its statistics.

Uplink Age Time elapsed since the mesh node became active in the mesh topology.

#Children Number of children associated with a parent mesh point.

Version Modification

ArubaOS 3.0 Command introduced

ArubaOS 3.4.1 The output of this command was also modified to include the Rate Tx/Rx column.

Platforms Licensing Command Mode

All platforms This show command is available in the

base operating system. Commands to

configure the mesh feature require the

Mesh license.

Enable or Config mode on master controllers

Column Description