Reference Guide

631 | show ap mesh-ht-ssid-profile Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
show ap mesh-ht-ssid-profile
show ap mesh-ht-ssid-profile [<profile>]
Description
Show configuration settings for a mesh high-throughput Service Set Identifier (SSID) profile.
Syntax
Usage Guidelines
High-throughput APs support additional settings not available in legacy APs. A mesh high-throughput SSID
profile can enable or disable high-throughput (802.11n) features and 40 Mhz channel usage, and define values for
aggregated MAC protocol data units (MDPUs) and Modulation and Coding Scheme (MCS) ranges.
The command show ap mesh-ht-ssid-profile displays a list of all mesh high-throughput SSID profiles configured
on the controller, including the number of references to each profile and each profile’s status. Include the
optional <profile> parameter to show detailed settings for an individual mesh high-throughput SSID profile.
Examples
The example below shows the configuration settings for the mesh high-throughput radio profile “default”.
The output of this command includes the following information:
Parameter Description
<profile> Name of a mesh high-throughput SSID profile.
Column Description
High throughput enable
(SSID)
Shows if 802.11n high-throughput features are enabled or disabled for this profile. By
default, high-throughput features are enabled.
40 MHz channel usage This parameter shows if the profile enables or disables the use of 40 MHz channels.
MPDU Aggregation This parameter shows if the profile enables or disables MAC protocol data unit (MPDU)
aggregation.
High-throughput mesh APs are able to send aggregated MAC protocol data units
(MDPUs), which allow an AP to receive a single block acknowledgment instead of
multiple ACK signals. This option, which is enabled by default, reduces network traffic
overhead by effectively eliminating the need to initiate a new transfer for every MPDU.
(host) #show ap mesh-ht-ssid-profile default
Mesh High-throughput SSID profile "default"
-------------------------------------------
Parameter Value
--------- -----
High throughput enable (SSID) Enabled
40 MHz channel usage Enabled
MPDU Aggregation Enabled
Max transmitted A-MPDU size 65535 bytes
Max received A-MPDU size 65535 bytes
Min MPDU start spacing 0 usec
Supported MCS set 1-14
Short guard interval in 40 MHz mode Enabled
Legacy stations Allowed
Allow weak encryption Disabled