Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show ap mesh-ht-ssid-profile | 632
Command History
Introduced in ArubaOS 3.4.
Command Information
Max transmitted A-MPDU
size
Maximum size of a transmitted aggregate MPDU, in bytes.
Max received A-MPDU size Maximum size of a received aggregate MPDU, in bytes.
Min MPDU start spacing Minimum time between the start of adjacent MPDUs within an aggregate MPDU, in
microseconds.
Supported MCS set A list of Modulation Coding Scheme (MCS) values or ranges of values to be supported
on this SSID. The MCS you choose determines the channel width (20MHz vs. 40MHz)
and the number of spatial streams used by the mesh node.
Short guard interval in 40
MHz mode
This parameter shows if the profile enables or disables use of short (400ns) guard
interval in 40 MHz mode.
A guard interval is a period of time between transmissions that allows reflections from
the previous data transmission to settle before an AP transmits data again. An AP
identifies any signal content received inside this interval as unwanted inter-symbol
interference, and rejects that data.
Legacy stations This parameter shows if the profile allows or disallows associations from legacy (non-
HT) stations.
Allow weak encryption Using TKIP or WEP encryption for unicast traffic forces legacy transmission rates on
high-throughput APs. This option is disabled by default, preventing clients using TKIP or
WEP for unicast traffic from associating with the mesh node.
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master controllers
Column Description