Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show ap provisioning | 654
show ap provisioning
show ap provisioning {ap-name <ap-name>}|{bssid <bssid>}|{ip-addr <ip-addr>}
Description
Show provisioning parameters currently used by an AP
Syntax
Example
The output of this command shows that the AP named AP8 has mostly default parameters. These appear with
the value N/A.
Parameter Description
ap-name <ap-name> Show data for an AP with a specific name.
bssid <bssid> Show data for a specific Basic Service Set Identifier (BSSID) on an AP. An AP’s BSSID is
usually the AP’s MAC address.
ip-addr <ip-addr> Show data for an AP with a specific IP address.
(host) #show ap provisioning ap-name AP8
AP "mp2" Provisioning Parameters
--------------------------------
Item Value
---- -----
AP Name mp2
AP Group mpp1
Location name N/A
SNMP sysLocation N/A
Master N/A
Gateway N/A
Netmask N/A
IP Addr N/A
DNS IP N/A
Domain Name N/A
Server Name Dell-master
Server IP N/A
Antenna gain for 802.11a N/A
Antenna gain for 802.11g N/A
Antenna for 802.11a both
Antenna for 802.11g both
IKE PSK N/A
PAP User Name N/A
PAP Password N/A
PPPOE User Name N/A
PPPOE Password N/A
PPPOE Service Name N/A
USB User Name N/A
USB Password N/A
USB Device Type any
USB Device Identifier N/A
USB Dial String N/A
USB Initialization String N/A
USB TTY device path N/A
Mesh Role mesh-point
Installation default