Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show ap spectrum channel-summary | 674
Related Commands
Command History
Introduced in ArubaOS 6.0.
Command Information
Max Interference(dBm) Signal strength of the non-Wi-Fi device that has the highest signal strength.
SNIR (db) The ratio of signal strength to the combined levels of interference and noise on that channel. This
value is calculated by determining the maximum noise-floor and interference-signal levels, and then
calculating how strong the desired signal is above this maximum.
Command Description Mode
ap spectrum local-override Convert an AP or AM into a spectrum monitor
by adding it to the spectrum local-override list.
Config mode on master or local
controllers
rf dot11a-radio-profile
mode spectrum-mode
Set a 802.11a radio so the device operates as
an spectrum monitor, and can send spectrum
analysis data to a desktop or laptop client.
Config mode on master or local
controllers
rf dot11g-radio-profile
mode spectrum-mode
Set a 802.11g radio so the device operates as
an spectrum monitor, and can send spectrum
analysis data to a desktop or laptop client.
Config mode on master or local
controllers
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master or local
controllers
Column Description