Reference Guide

685 | show ap spectrum device-duty-cycle Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
show ap spectrum device-duty-cycle
show ap spectrum device-duty-cycle {ap-name <ap-name>}|{ip-addr <ip-addr>} freq-band
2.4ghz|5ghz
Description
Shows the current duty cycle for devices on all channels being monitored by the spectrum monitor radio.
Syntax
Usage Guidelines
The FFT Duty Cycle table in the output of this command shows the duty cycle for each radio channel. The duty
cycle is the percentage of time each device type operates or transmits on that channel. For additional details
about non-Wi-Fi device types shown in this table, see “Non-Wi-Fi Interferers” on page687.
Examples
The output of this command shows that video devices sent a signal on channels 153 and 157 during 99% of the
last sample interval.
Parameter Description
ap-name <ap-name> Name of the spectrum monitor for which you want to view spectrum information.
ip-addr <ip-addr> IP address of the spectrum monitor for which you want to view spectrum information.
freq-band 2.4ghz|5ghz View information for a specific radio type, either 2.4 GHz or 5 GHz.
Note: This chart is only available for AP models W-AP105 and the W-AP90 Series.
Device Duty Cycle Table (in %)
------------------------------
Device Type 149 153 157 161 165 149+ 157+
----------- --- --- --- --- --- ---- ----
Generic Interferer 0 0 0 0 0 0 0
WIFI 5 0 5 12 8 0 12
Microwave 0 0 0 0 0 0 0
Bluetooth 0 0 0 0 0 0 0
Generic Fixed Freq 0 0 0 0 0 0 0
Cordless Phone FF 0 0 0 0 0 0 0
Video 0 99 99 0 0 0 0
Audio 0 0 0 0 0 0 0
Generic Freq Hopper 0 0 0 0 0 0 0
Cordless Network FH 0 0 0 0 0 0 0
Xbox 0 0 0 0 0 0 0
Microwave Inverter 0 0 0 0 0 0 0
Cordless Base FH 5 5 5 5 5 0 0
Total:7