Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show ap spectrum device-list | 692
The output of this command includes the following information:
Column Description
Type Device type. This parameter can be any of the following:
z audio FF (fixed frequency)
z bluetooth
z cordless base FH (frequency hopper)
z cordless phone FF (fixed frequency
z cordless network FH (frequency hopper)
z generic FF (fixed frequency
z generic FH (frequency hopper)
z generic interferer
z microwave
z microwave inverter
z video
z xbox
NOTE: For additional details about non-Wi-Fi device types shown in this table, see “Non-
Wi-Fi Interferers” on page687
ID ID number assigned to the device by the spectrum monitor. A spectrum monitor assigns a
unique spectrum ID per device type.
Cfreq Center frequency of the signal sent from the device.
Bandwidth Channel bandwidth used by the device.
Channels-affected Radio channels affected by the wireless device.
Signal-strength Strength of the signal sent from the device, in dBm.
Duty-cycle Device duty cycle. This value represents the percent of time the device broadcasts a
signal.
Add-time Time at which the device was first detected.
Update-time Time at which the device’s status was updated.
(host) #show ap spectrum device-list ap-name ap123 freq-band 5ghz
Non-Wifi Device List Table
--------------------------
Type ID Cfreq Bandwidth Channels-affected Signal-strength
---- -- ----- --------- ----------------- ---------------
Cordless Phone FH 3 5826093 80000 149 157 161 165 49
Duty-cycle Add-time Update-time
---------- -------- -----------
5 2010-05-17 10:04:53 2010-05-17 10:04:55
Total:1
Current Time:2010-05-17 10:04:56