Reference Guide

713 | show ap wired-ap-profile Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
show ap wired-ap-profile
show ap wired-ap-profile [<profile>]
Description
Show a list of all wired AP profiles, or display the configuration parameters in a specific wired AP profile.
Syntax
Usage Guidelines
The command show ap wired-ap-profile displays a list of all wired AP profiles, including the number of references
to each profile and the profile status. If you include the optional <profile> parameter, the command will display
detailed information for that one profile.
Example
The output of this command shows the configuration parameters for the wired AP profile “default”.
The output of this command includes the following information:
Parameter Description
<profile> Name of a wired AP profile.
Column Description
Wired AP enable Indicates whether the wired AP profile is enabled or disabled.
Forward mode The configured forward mode for the profile.
z bridge: Bridge locally
z split-tunnel: Tunnel to controller or NAT locally
z tunnel: Tunnel to controller
Switchport mode The profile’s switching mode.
z access: Set access mode characteristics of the interface.
z mode: Set trunking mode of the interface.
z trunk: Set trunk mode characteristics of the interface.
Access mode VLAN VLAN ID of the access mode VLAN.
Trunk mode native VLAN VLAN ID of the native VLAN.
Trunk mode allowed VLANs Range of allowed VLAN IDs for the native VLAN.
(host) #show ap wired-ap-profile default
Wired AP profile "default"
--------------------------
Parameter Value
--------- -----
Wired AP enable Disabled
Forward mode tunnel
Switchport mode access
Access mode VLAN 1
Trunk mode native VLAN 1
Trunk mode allowed VLANs 1-4094
Trusted Not Trusted
Broadcast Broadcast