Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show country | 739
show country
show country [trail]
Description
Show controller’s country and domain upgrade trail.
Syntax
Usage Guidelines
A controller’s country code sets the regulatory domain for the radio frequencies that the APs use. This value is
typically set during the controller’s initial setup procedure. Use this command to determine the country code
specified during setup.
Example
The output of this command shows the controller’s country, model and hardware types.
Command History
This command was available in ArubaOS 1.0.
Command Information
Parameter Description
trail Display the record showing how the switch was reconfigured for it’s current country
domain when the controller hardware was upgraded.
Platforms Licensing Command Mode
All platforms Base operating system Config or Enable mode on master or local
controllers
(host) # show country
Country:US
Model:-US
Hardware:Restricted US