Reference Guide

809 |show ids profile Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
show ids profile
show ids profile <profile-name>
Description
Show an IDS profile.
Syntax
Usage Guidelines
Issue this command without the <profile> parameter to display the entire IDS profile list, including profile
status and the number of references to each profile. Include a profile name to display detailed configuration
information for that profile.
Examples
The example below shows that the controller has five configured IDS Profiles.
This example displays the configuration settings for the profile ids-low-setting.
The output of this command includes the following parameters:
Parameter Description
<profile-name> Name of an IDS profile.
Parameter Description
IDS General profile Name of a IDS General profile to be applied to an AP or AP group.
IDS Signature Matching
profile
Name of a IDS Signature Matching profile to be applied to an AP or AP group.
IDS DOS profile Name of a IDS Denial of Service profile to be applied to an AP or AP group.
(host) # show ids profile
IDS Profile List
----------------
Name References Profile Status
---- ---------- --------------
default 1
ids-disabled 0 Predefined
ids-high-setting 0 Predefined
ids-low-setting 5 Predefined
ids-medium-setting 0 Predefined
Total:5
(host) # show ids profile ids-low-setting
IDS Profile "ids-low-setting" (Predefined)
------------------------------------------
Parameter Value
--------- -----
IDS General profile default
IDS Signature Matching profile factory-default-signature
IDS DOS profile ids-dos-low-setting
IDS Impersonation profile default
IDS Unauthorized Device profile default