Reference Guide

Table Of Contents
825 | show interface gigabitethernet Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
The output of this command includes the following parameters:
The output of this command includes the following parameters:
The output of this command includes the following parameters:
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Parameter Description
Name Port name.
Switchport Whether or not switchport is enabled.
Administrative mode Administrative mode .
Operational mode Operational mode.
Administrative
Trunking
Encapsulation
Encapsulation method used for administrative trunking.
Operational Trunking
Encapsulation
Encapsulation method used for operational trunking.
Access Mode VLAN The access mode VLAN for the specified port.
Trunking Native Mode
VLAN
The trunking native mode VLAN for the specified port.
Trunking Vlans
Enabled
Number of trunking VLANs currently enabled.
Trunking Vlans Active Number of trunking VLANs currently active.
Parameter Description
Name Name of the specified port.
Untrusted Vlan(s) List of untrusted VLANs.
Parameter Description
xsec vlan 7 is ACTIVE This states that xsec is active on the specified port as well as the associated VLAN.
Platforms Licensing Command Mode
All platforms Base operating system Enable or config mode on master controllers
#show interface gigabitethernet 1/0 untrusted-vlan
Name: GE1/0
#show interface gigabitethernet 1/1 xsec
xsec vlan 7 is ACTIVE