Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide acceleration | 85
acceleration
aaa authentication
acceleration head-end ip-address <ip-address>
Description
This command configures a RAP for the Application Acceleration module. The Application Acceleration module
improves application performance.
Syntax
Usage Guidelines
Configure the head-end device on the RAP by entering the device’s IP address. The head-end device is the
Application Acceleration server (AAS). You need to install and configure the Application Acceleration server
before you can configure the RAP.
Refer to the ArubaOS Application Acceleration Server Installation and Quick Start Guide and the ArubaOS
Application Acceleration Module 1.0 Administration Guide for detailed information about configuring this server.
Example
This example configures the RAP so that it intercepts the client request and forwards it to the head-end device
(AAS).
(host)(config)# acceleration head-end ip-address 10.1.22.200
Related Commands
View acceleration statistics using the command show acceleration.
Command History
Command Information
Parameter Description Range Default
head-end Configures the head-end device. The head-end device is
the Application Acceleration server.
——
ip-address <ip-
address>
The IP address of the Application Acceleration server
(head-end) device.
——
Release Modification
ArubaOS 5.0 Command introduced
Platforms Licensing Command Mode
All platforms Application-Acceleration license Config mode on master controllers