Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show ip mobile | 854
Examples
The example below lists mobility domains configured on the controller, and shows information for any subnets
defined on these domains.
The output of this command includes the following parameters:
Use the show ip mobile host command to track mobile users.
The output of this command includes the following parameters:
visitor Display a list of mobile nodes visiting a foreign agent.
[<host-ip>] Filter the Foreign Agent Visitor list to display data for a specific host IP adddress.
[<host-macaddr>] Filter the Foreign Agent Visitor list to display data for a specific host MAC adddress.
[brief] Limit the output of this command to show just two lines of data.
Parameter Description
subnet Subnet configured for the IP mobility service.
mask Subnet mask
VLAN ID VLAN ID of the VLAN used by the subnet.
Home Agent IP address of the home agent or mobility agent.
Description Description of the HAT entry.
Parameter Description
<mac-addr> <ip-addr> MAC and IP addresses of the host
Roaming Status Displays how long the host has used its current controller and VLAN.
Home VLAN VLAN ID, IP address and subnet of the home VLAN.
Parameter Description
(host) #show ip mobile domain
Mobility Domains:, 2 domain(s)
------------------------------
Domain name default
Home Agent Table, 0 subnet(s)
Domain name newdomain
Home Agent Table, 2 subnet(s)
subnet mask VlanId Home Agent Description
--------------- --------------- ------ --------------- -----------------------
10.2.124.76 255.255.255.255 1 10.4.62.2 Corporate mobility entry
172.21.5.50 255.255.255.255 1 10.4.62.2 Reserved entries
(host) #show ip mobile host
Mobile Host List, 1 host(s)
---------------------------
00:40:96:a6:a1:a4 10.0.100.194
Roaming Status: Home Switch/Home VLAN, Service time 0 days 00:06:47
Home VLAN 100 on network 10.0.100.0/24
DHCP lease for corporate-240 at Thu Sep 21 15:11:44 2006 for 7200 secs from 10.3.26.1