Reference Guide

876 | show ipv6 mld config Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
show ipv6 mld config
show ipv6 mld config
Description
Displays Multicast Listener Discover (MLD) configuration details.
Example
This example displays the current MLD configuration values.
The output of this command includes the following parameters:
Command History
This command was available in ArubaOS 3.3.
Command Information
Parameter Description
robustness-variable Denotes the value that is used to calculate the timeout value of a MLD client.
query-interval Denotes the time interval at which the MLD query is sent.
query-response-interval Denotes the time interval during the MLD query response should be received.
startup-query-interval Denotes the time interval between successive MLD queries during startup.
startup-query-count Number of times queries are sent during startup.
last-member-query-interval Denotes the time interval between successive MLD queries after the last member has
left the MLD group.
last-member-query-count Number of times queries are sent after the last member has left the MLD group.
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master and local
controllers
(host) #show ipv6 mld config
MLD Config
----------
Name Value
---- -----
robustness-variable 2
query-interval 125
query-response-interval 100
startup-query-interval 31
startup-query-count 2
last-member-query-interval 10
last-member-query-count 2