Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show profile-errors | 950
show profile-errors
show profile-errors
Description
Displays the list of invalid user-created profiles.
Syntax
No parameters.
Example
The output of this command shows list of profiles that are invalid and also displays the error in those profiles. In
this example, the VLAN 1000 that is mapped to virtual-ap test-vap does not exist.
The following are the list of some profile errors:
Command History
This command was available in ArubaOS 3.0
Error Description
Named VLAN [named_VLAN] is removed These errors are displayed if a virtual AP profile is configure
with a VLAN that does not exist.
Named VLAN [named_VLAN] is not mapped
Named VLAN [named_VLAN] is invalid
VLAN [x] does not exist
Server group is invalid This error is displayed if an AAA profile is configured an invalid
server group.
User derivation rule is invalid This error is displayed if a user role in an AAA profile is invalid.
User role is invalid
Controller country code is undefined These errors are displayed, if your controller is not set to the
correct country code or if the country code specified in a
WLAN profile does not match the controller’s country code.
Country [country_name] does not match controller country
[country_name]
Opmode requires WPA key This message is displayed if a SSID profile is configured
without a WPA key.
WARNING: if weptxkey = [x], wepkey[x] must be set in order to
use static WEP
This message is displayed if a SSID profile is configured to use
a static WEP and the WEP is not configured.
(host) #show profile-errors
Invalid Profiles
----------------
Profile Error
------- -----
wlan virtual-ap "test-vap" VLAN 1000 does not exist