Users Guide

Dell PowerConnect W-Series ArubaOS 6.1 | User Guide RF Plan | 101
The following example assumes you are not renaming an AP For more information about AP names, see Chapter
4, “Access Points” on page107.
provision-ap
read-bootinfo ap-name <name>
copy-provisioning-params ap-name <name>
fqln <name>
reprovision ap-name <name>
RF Plan Example
This section guides you through the process of creating a building and populating it with APs and AMs using RF
Plan. Ensure you have sample.JPEG floor images handy for walking through this planning example.
Sample Building
Table 19 lists the information to be used in this coverage-based planning example.
Table 19 Sample Building
Building Dimensions
Height: 100
Width: 100
Number of Floors: 2
User Information
Number of Users: N/A
Users per AP: N/A
Radio Types: 802.11a/b/g/n
AP Type: AP-93
Overlap Factor: 150% (Medium)
AP Desired Rates (5 GHz Radio Properties)
802.11a Desired Rate: 48 Mbps
802.11n (HT) Support: N/A
Use 40 MHz Channel Spacing: N/A
802.11n Desired Rate: N/A
AP Desired Rates (2.4 GHz Radio Properties)
802.11b/g Desired Rate: 48 Mbps
802.11n (HT) Support: N/A
Use 40 MHz Channel Spacing: N/A
802.11n Desired Rate: N/A
AM Desired Rates
802.11b|g: 24 Mbps
802.11a: 24 Mbps