Users Guide

102 | RF Plan Dell PowerConnect W-Series ArubaOS 6.1 | User Guide
Create a Building
In this section you create a building using the information supplied in the planning table.
1. In the Campus List, select New Campus. Enter: My Campus and click OK.
2. In the Campus List, select the checkbox next to My Campus, and click Browse Campus.
3. Click New Building. The Overview page appears.
4. Click Save. A dialog box appears that indicates the new building was saved successfully. Click OK to close the
dialog box.
5. Click Building Dimension. The Specification page appears.
6. Enter the following information in the text boxes.
7. Click Save. A dialog box appears that asks if you want to save and reload this building now since the building
name was changed. Click OK to accept.
Another dialog box appears stating that the building was saved successfully. Click OK to close the dialog box.
8. Click Apply. RF Plan returns you to the Overview page.
Don’t Care/Don’t Deploy Areas
Shipping & Receiving = Don’t CareLobby = Don’t Deploy
802.11n Hotspot (Zone) Areas
N/A
Table 20 Create a Building
Text Box Information
Campus Name My Campus
(The name is automatically populated based on what you entered in
step 1)
Building Name My Building
Width 100
Length 100
Inter Floor Height 20
Units Feet
Floors 2
Table 19 Sample Building (Continued)
Building Dimensions