Users Guide

Dell PowerConnect W-Series ArubaOS 6.1 | User Guide Advanced Security | 387
Figure 58 Certificate Information
c. Click the Authentication tab. In the resultant window, click the Add tab and select EAP/PEAP. Move this
option to the top of the list if PEAP is the method chosen. If certification validation not required, uncheck
the Validate server certificates setting.
d. Click the PEAP Settings tab and select the EAP protocol supported.
e. Click OK.
f. To modify an existing profile, select the profile and then click the Properties tab.
4. Select the Network tab to configure the network for wireless client. For wired clients, skip this step.
Figure 59 Network Profile
a. Click the Add tab. Enter the SSID to which the client connects.
b. Set the Network type to Infrastructure.
c. Set the Association mode to xSec, AES encryption is automatically selected.
d. Under Authentication, select the Authenticate using profile checkbox.
e. From the pull down menu, select the profile used for 802.1x authentication. This would be one of the
profiles configured in step 2.
f. Select the keys that will be generated automatically for data privacy.