Users Guide

632 | Spectrum Analysis Dell PowerConnect W-Series ArubaOS 6.1 | User Guide
Figure 145 Device Duty Cycle
Table 134 describes the parameters you can use to customize the Device Duty Cycle chart. Click the down arrow
in the upper right corner of this chart then click the Options menu to access these configuration settings. Once
you have configured the desired parameters, click OK at the bottom of the Options menu to save your settings
and return to the spectrum dashboards.
Table 134 Device Duty Cycle Options
Parameter Description
Band This field shows the radio band used by the spectrum monitor or hybrid AP radio (2.4 GHz or 5GHz). It is not
selectable and cannot be changed via the Options window.
Channel
Numbering
For spectrum monitors using the 5 GHz radio band, select either 20 MHz or 40 MHz channel numbering to
identify a channel numbering scheme for the graph.
NOTE: This parameter is not configurable for graphs created by hybrid APs or spectrum monitor radios that
use the 2.4 GHz radio band.
Channel Range For graphs created by spectrum monitors, specify a channel range to determine which channels will appear in
this graph. Click the first drop-down list to select the lowest channel in the range, then click the second drop-
down list to select the highest channel to appear in the graph.
By default, this graph will display all channels within the spectrum monitor’s radio band.
NOTE: This parameter is not configurable for graphs created by hybrid APs.