Users Guide

Dell PowerConnect W-Series ArubaOS 6.1 | User Guide Voice and Video | 687
d. Click the Apply button to save the configurations.
Figure 170 Enable Multicast Rate Optimization
6. Configure ARM scanning for video traffic.
Under the Profiles column, expand RF Management > Adaptive Radio Management (ARM) Profile and
select the profile name. This example uses the default profile. Select the Video Aware Scan option and click
the Apply button.
Figure 171 Enabling Video Aware Scan
7. Configure and apply bandwidth management profile
Under the Profiles column, expand Virtual AP > [profile-name] > WMM Traffic Management Profile. In
the Profile Details section, select the profile name from the drop down list box. Select the Enable Shaping
Policy option and enter the bandwidth share values. Click the Apply button to save the settings.
This step is optional.
Figure 172 Configuring bandwidth management
After you configure the WMM bandwidth management profile, apply it to the virtual AP profile.
8. Enable multicast shaping on the firewall.
a. Navigate to the Configuration > Advanced Services > Stateful Firewall page.
b. Click the Global Setting tab and select the Multicast automatic shaping checkbox.
c. Click the Apply button to save the configurations.
Figure 173 Enable Firewall Multicast Shaping
NOTE: Ensure that you configure the WMM traffic management profile to the virtual AP profile if you have configured the
virtual AP traffic management profile.