Users Guide

Dell PowerConnect W-Series ArubaOS 6.1 | User Guide Behavior and Defaults | 781
network-operations This role supports a subset of show, configuration, action, and database commands that are used
to monitor the controller. You can log into the CLI; however, you can only use a subset of CLI
commands to monitor the controller.
This role permits the following WebUI pages and associated CLI commands:
As a network-operations user, commands with an asterisk (*) are hidden in the CLI but are
executed and visible from the WebUI.
Plan Page
 You can move APs on the floor plan and save their new location.
 You cannot change or modify the AP configuration.
Reports Page
 You can view all of the available reports.
Events Page
 You can view all of the available events.
Monitoring Page
You can view the reports created by the following CLI commands:
 show keys all
 show mobility-managers
 show roleinfoshow license
*
 show ap essid
 DB:opcode=cr-load
Monitoring > Network > Network Summary
You can view the reports created by the following CLI commands:
 show interface vlan <id>
 show interface loopback
 show datapath utilization
 show aaa state configuration
 show user-table unique
 show aaa authentication-server all
 show switches summary
 show ap blacklist-clients
 show wlan-ap-count type access-points
*
 show wlan-ap-count type air-monitor
*
 show wlan-ap-count type secure-access
*
 show user-table verboseshow ap database unprovisioned page <page>
 show ap-group default
 show wlan virtual-ap
 show rf dot11a-radio-profile
 show rf dot11g-radio-profile
 show ap wired-ap-profile
 show ap enet-link-profile
 show ap system-profile
 show wlan voip-cac-profile
 show wlan traffic-management-profile
 show ap regulatory-domain-profile
 show ap snmp-profile
 show rf optimization-profile
 show rf event-thresholds-profile
 show ids profile
 show rf arm-profile
 show ap association bssid
Table 173 Predefined Management Roles (Continued)
Predefined Role Permissions