Reference Guide

Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide show master-redundancy | 1009
show master-redundancy
show master-redundancy
Description
Display the master controller redundancy configuration.
Syntax
No parameters.
Example
This example below shows the current master redundancy configuration, including the ID number of the master
VRRP virtual router and the IP address of the peer controller for master redundancy.
Related Commands
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Command Description
master-redundancy
master-vrrp
This command associates a VRRP instance with master controller redundancy.
vrrp This command configures the Virtual Router Redundancy Protocol (VRRP).
Platforms Licensing Command Mode
All platforms Base operating system Enable and Config mode on master controllers.
(host) #show master-redundancy
Master redundancy configuration:
VRRP Id 2 current state is MASTER
Peer's IP Address is 2.1.1.4