Reference Guide

Table Of Contents
1122 | show snmp trap-list Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide
show snmp trap-list
show snmp trap-list
Description
Displays the list of SNMP traps.
Syntax
No parameters.
Example
The output of this command shows the list of SNMP traps and the status.
Command History
This command was available in ArubaOS 3.0
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config or Enable mode on master or local
controllers
(host) # show snmp trap-list
SNMP TRAP LIST
--------------
TRAP-NAME CONFIGURABLE ENABLE-STATE
--------- ------------ ------------
authenticationFailure Yes Enabled
coldStart Yes Enabled
linkDown Yes Enabled
linkUp Yes Enabled
warmStart Yes Enabled
wlsxAPBssidEntryChanged Yes Enabled
wlsxAPEntryChanged Yes Enabled
wlsxAPImpersonation Yes Enabled
wlsxAPInterferenceCleared Yes Enabled
wlsxAPInterferenceDetected Yes Enabled
wlsxAPRadioAttributesChanged Yes Enabled
wlsxAPRadioEntryChanged Yes Enabled
wlsxAccessPointIsDown Yes Enabled
wlsxAccessPointIsUp Yes Enabled
wlsxAdhocNetwork Yes Enabled
wlsxAdhocNetworkBridgeDetected Yes Enabled
wlsxAdhocNetworkBridgeDetectedAP Yes Enabled
...
...
...
...
wlsxFanOK Yes Enabled
wlsxFanTrayInserted Yes Enabled
--More-- (q) quit (u) pageup (/) search (n) repeat