Reference Guide

Table Of Contents
1146 | show tunneled-node Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide
show tunneled-node
show tunneled-node [state|database]
Description
Displays the state of the tunneled node and lists all tunneled nodes connected to the controller.
Syntax
No parameters.
Example
The output of this command shows the tunneled node state.
Command History
Command Information
Release Modification
ArubaOS 3.0 Command introduced.
ArubaOS 6.1 The command name was changed to tunneled-node. The database parameter was
added.
Platforms Licensing Command Mode
All platforms Base operating system Config or Enable mode on master or local
controllers
(host) # show tunneled-node state
Tunneled Node State
---------
IP MAC s/p state vlan tunnel inactive-time
-- --- --- ----- ---- ------ -------------
192.168.123.14 00:0b:86:40:32:40 1/23 complete 10 9 1
192.168.123.14 00:0b:86:40:32:40 1/22 complete 10 10 1
192.168.123.14 00:0b:86:40:32:40 1/20 complete 10 11 1