Reference Guide

Table Of Contents
1168 | show voice call-perf Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide
show voice call-perf
show voice call-perf [bssid <value> | essid <value> | extn <value> |
ip <ip_address> | proto <value>
Description
Displays the performance of voice calls of all clients connected to the controller. You can filter the report based
on BSSID, ESSID, extension, IP address or the VOIP protocol type.
Syntax
Example
The output of this command shows call performance report for extension 3015.
Parameter Description
bssid Filter records based on BSSID of voice clients.
essid Filter records based on ESSID of voice clients.
extn Filter records based on the extension of a voice client.
ip <ip-address> Filter records based on the IP address of an AP.
proto <protocol> Filter records based on a VOIP protocol. Supported values are:
SIP
NOE
SCCP
VOCERA
H323
(host) # show voice call-perf extn 3015
VoIP Call Performance Report for Client '3015'
----------------------------------------------
Sample Time Delay(ms) AP-Switch Delay(ms) Jitter Packet Loss R-Value MOS Band
----------- --------- ------------------- ------ ----------- ------- --- ----
Jan 31 15:54:46 0.00 0.00 0.000 0.00 0.00 NA NA
Jan 31 15:50:00 0.00 0.00 0.000 0.00 0.00 NA NA
Jan 31 15:40:00 0.00 0.00 0.000 0.00 0.00 NA NA
Jan 31 15:30:00 0.00 0.00 0.000 0.00 0.00 NA NA
Jan 31 15:20:00 108.24 0.00 7.793 8.81 73.00 3.60 YELLOW
Jan 31 15:10:00 106.67 0.00 12.500 4.44 84.00 4.02 GREEN
Jan 31 15:00:00 0.00 0.00 0.000 0.00 0.00 NA NA
Jan 31 14:50:00 0.00 0.00 0.000 0.00 0.00 NA NA
Jan 31 14:40:00 0.00 0.00 0.000 0.00 0.00 NA NA
Jan 31 14:30:00 0.00 0.00 0.000 0.00 0.00 NA NA
...
...
...