Reference Guide

1174 | show voice client-status Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide
show voice client-status
show voice client-status [active-only | bssid | essid <value> |
extn <value> | ip <ip_address> | proto <value> | sta <value>]
Description
Displays list of voice clients and their status. You can also view details of a specifc voice client.
Syntax
Example
The output of this command shows details about all the voice clients on a controller.
Parameter Description
active-only Filter records based on active voice clients
bssid Filter records based on BSSID of a voice client.
essid Filter records based on ESSID of a voice client.
extn Filter records based on the extension of a voice client.
ip <ip-address> Filter records based on the IP address of a voice client.
proto <protocol> Filter records based on a VOIP protocol. Supported values are:
 SIP
 SVP
 NOE
 SCCP
 VOCERA
 H323
sta Filter records based on the MAC address of a voice client.
(host) #show voice client-status
Voice Client(s) Status
----------------------
Client(IP) Client(MAC) Client Name ALG Server(IP) Registration State Call Status BSSID
ESSID AP Name Flags
---------- ----------- ----------- --- ---------- ------------------ ----------- -----
----- ------- -----
10.15.22.32 00:1f:6c:7a:d5:30 6001 sccp 10.15.32.20 REGISTERED Idle
00:1a:1e:80:bb:10 keepwalking1 AP-L-125
Num Clients:1
Flags: V - Visitor, W - Wired, R - Remote