Reference Guide

1204 | show wlan ssid-profile Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide
802.11g Basic Rates List of supported 802.11b/g rates, in Mbps, that are advertised in beacon frames and probe
responses.
802.11g Transmit Rates Set of 802.11b/g rates at which the AP is allowed to send data.
Station Ageout Time Time, in seconds, that a client is allowed to remain idle before being aged out.
Max Transmit Attempts Maximum transmission failures allowed before the client gives up.
RTS Threshold Wireless clients transmitting frames larger than this defined threshold must issue Request
to Send (RTS) and wait for the AP to respond with Clear to Send (CTS).
Short Preamble Shows if the profile enables or disables short preamble for 802.11b/g radios
Max Associations Maximum number of wireless clients for the AP
Wireless Multimedia
(WMM)
Shows if the profile enables or disables WMM, also known as IEEE 802.11e Enhanced
Distribution Coordination Function (EDCF)
Wireless Multimedia U-
APSD (WMM-UAPSD)
Powersave
Shows if the profile enables or disables Wireless Multimedia (WMM) UAPSD powersave.
WMM TSPEC Min
Inactivity Interval
Specifies the minimum inactivity time-out threshold of WMM traffic.
DSCP mapping for WMM
voice AC
DSCP value used to map WMM voice traffic.
DSCP mapping for WMM
video AC
DSCP value used to map WMM video traffic.
DSCP mapping for WMM
best-effort AC
DSCP value used to map WMM best-effort traffic.
DSCP mapping for WMM
background AC
DSCP value used to map WMM background traffic.
902il Compatibility
Mode
(For clients using NTT DoCoMo 902iL phones only) When enabled, the controller does not
drop packets from the client if a small or old initialization vector value is received.
Hide SSID Shows if the profile enables or disables hiding of the SSID name in beacon frames.
Deny_Broadcast Probes When a client sends a broadcast probe request frame to search for all available SSIDs, this
option controls whether or not the system responds for this SSID. When enabled, no
response is sent and clients have to know the SSID in order to associate to the SSID. When
disabled, a probe response frame is sent for this SSID
Local Probe Response Shows if the profile enables or disables local probe response on the AP. If this option is
enabled, the AP is responsible for sending 802.11 probe responses to wireless clients’
probe requests. If this option is disabled, then the controller sends the 802.11 probe
responses
Disable Probe Retry Shows if the profile enables or disables battery MAC level retries for probe response
frames.
Battery Boost If enabled, this feature converts multicast traffic to unicast before delivery to the client,
thus allowing you to set a longer DTIM interval.
WEP Key 1 Displays the Static WEP key associated with this key index.
WEP Key 2 Displays the Static WEP key associated with this key index.
WEP Key 3 Displays the Static WEP key associated with this key index.
WEP Key 4 Displays the Static WEP key associated with this key index.
WEP Transmit Key Index Show the key index that specifies which static WEP key is to be used
Parameter Description