Reference Guide

Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide show wms rules | 1231
show wms rules
show wms rules
config
state
summary
Description
Display the internal state and matching information of rules created using the ids ap-classification-rule
command.
Syntax
Usage Guidelines
Issue this command to view existing AP classification rules. AP classification rule configuration is performed only
on a master controller. If AMP is enabled via the mobility-manager command, then processing of the AP
classification rules is disabled on the master controller. A rule is identified by its ASCII character string name (32
characters maximum). The AP classification rules have one of the following specifications:
 SSID of the AP
 SNR of the AP
 Discovered-AP-Count or the number of APs that can see the AP
Parameter Description
config Display the following information for each AP classification rule.
 name
 ids
 match-ssid
 min-snr
 max-snr
 min-prcnt
 max-prcnt
 ssids
 enabled
 classify
 conf-incr
 flags
 match-cnt
state Display the following information for each AP classification rule:
 SSID Match Table
 SSID Exclude Table
 SNR Table
 Probe Count Table
summary Display an AP classification rules summary.