Reference Guide

Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide show wms system | 1233
show wms system
show wms system
Description
Show the WMS system configuration and system state.
Syntax
No parameters.
Example
This example shows the WMS System Configuration and System State tables.
The output of this command includes the following information:
Column Description
Max Threshold The maximum number of table entries allowed. If this table displays a zero (0), there is no
configured limit.
NOTE: If a configured maximum limit has reached, the controller will not create new WMS entries
for monitored APs and monitored stations. If new APs are deployed after this limit is reached, those
APs will not be marked as 'valid', which will impair the effectiveness of the Adaptive Radio
Management feature. If there are new Rogue APs in the network, they will not be classified as a
rogue.
Current Threshold Current number of table entries.
Total AP Count Total number of statistics entries for monitored APs in the AP table.
Total STA Count Total number of statistics entries for monitored stations in the Station table.
MAX RB-tree Count Maximum number of entries allowed in the statistics.
(host) #show wms system
System Configuration
--------------------
Key Value
--- -----
max-threshold 0
max-rbtree-entries 0
max-system-wm 1000
system-wm-update-interval 8
System State
-------------
Key Value
--- -----
Max Threshold 25000
Current Threshold 230
Total AP Count 228
Total STA Count 5
MAX RB-tree Count 50000
Total Tree Count 195
Poll Count(Max) 1(2)
Learned OUIs for Deployed APs
------------------------------
OUI
---
00:1a:1e:00:00:00