Reference Guide

1276 | vlan-bwcontract-explist Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide
vlan-bwcontract-explist
vlan-bwcontract-explist mac <mac>
Description
Use this command to add entries to or remove entries from the MAC exception list for bandwidth contracts on
broadcast/multicast traffic.
Syntax
Usage Guidelines
Bandwidth contracts on a VLAN can limit broadcast and multicast traffic. ArubaOS version 6.0 and later includes
an internal exception list to allow broadcast and multicast traffic using the VRRP, LACP, OSPF, PVST and STP
protocols. To remove per-vlan bandwidth contract limits on an additional broadcast or multicast protocol, add
the MAC address for that broadcast/multicast protocol to the Vlan Bandwidth Contracts MAC Exception List.
Example
The following command adds the MAC address for CDP (Cisco Discovery Protocol) and VTP (Virtual Trunking
Protocol to the list of protocols that are not limited by VLAN bandwidth contracts.
(host) (config) #vlan-bwcontract-explist mac 01:00:0C:CC:CC:CC
Related Commands
Command History
Command introduced in ArubaOS 6.0.
Command Information
Parameter Description
<mac> MAC address of a protocol that should be added to or removed from the exception list for
bandwidth contracts.
Command Description
show vlan-bwcontract-explist
[internal]
This command shows the regular or internal VLAN bandwidth contract exception list
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master or local controllers