Reference Guide

Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide aaa authentication captive-portal | 17
aaa authentication captive-portal
aaa authentication
aaa authentication captive-portal <profile>
black-list <black-list>
clone <source-profile>
default-guest-role <role>
default-role <role>
enable-welcome-page
guest-logon
ip-addr-in-redirection <ipaddr>
login-page <url>
logon-wait {cpu-threshold <percent>}|{maximum-delay <seconds>}|{minimum-delay <secs> }
logout-popup-window
max-authentication-failures <number>
no ...
protocol-http
redirect-pause <secs>
server-group <group-name>
show-acceptable-use-policy
show-fqdn
single-session
controller-in-redirection-url <ipaddr>
use-chap
user-logon
user-vlan-in-redirection-url <vlan>
welcome-page <url>
white-list <white-list>
Description
This command configures a Captive Portal authentication profile.
Syntax
This command includes the following configuration parameters.
Parameter Description Range Default
<profile> Name that identifies an instance of the profile. The name
must be 1-63 characters.
— “default”
black-list
<black-list>
Name of an existing black list on an IPv4 or IPv6 network
destination. The black list contains websites
(unauthenticated) that a guest cannot access.
——
clone Name of an existing Captive Portal profile from which
parameter values are copied.
——
default-guest-role Role assigned to guest. — guest
default-role
<role>
Role assigned to the Captive Portal user upon login. When
both user and guest logon are enabled, the default role
applies to the user logon; users logging in using the guest
interface are assigned the guest role.
— guest
enable-welcome-
page
Displays the configured welcome page before the user is
redirected to their original URL. If this option is disabled,
redirection to the web URL happens immediately after the
user logs in.
enabled/
disabled
enabled
guest-logon Enables Captive Portal logon without authentication. enabled/
disabled
disabled