Reference Guide

Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide esi server | 233
esi server
esi server <name>
[dport <tcp-udp-port>] |
[mode {bridge | nat | route}] |
[no] |
[trusted-ip-addr <ip-addr> [health-check]] |
[trusted-port <slot/port>] |
[untrusted-ip-port <ip-addr> [health-check]] |
[untrusted-port <slot/port>]
Description
This command configures an ESI server.
Syntax
Usage Guidelines
Use the show esi server command to show ESI server information.
Example
The following command specifies the ESI server attributes.
(host) (config) #esi server forti_1
mode route
trusted-ip-addr 10.168.172.3
untrusted-ip-addr 10.168.171.3
Command History
Introduced in ArubaOS 2.5.
Command Information
Parameter Description
dport Specifies the NAT destination TCP/UDP port.
mode Specifies the ESI server mode of operation: bridge, nat, or route
no Negates any configured parameter.
trusted-ip-addr Specifies the server IP address on the trusted network. As an option, you can also enable a health
check on the specified address
trusted-port Specifies the port connected to the trusted side of the ESI server; slot/port format.
untrusted-ip-addr Specifies the server IP address on the untrusted network. As an option, you can also enable a health
check on the specified address
untrusted-port Specifies the port connected to the untrusted side of the ESI server.
Platform License Command Mode
Available on all platforms Requires the PEFNG license Config mode on master
and local controllers