Reference Guide

292 | interface vlan Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide
interface vlan
interface vlan <vlan>
bandwidth-contract <name>
bcmc-optimization
description <string>
ip address {<ipaddr> <netmask>|dhcp-client|{internal}|pppoe}|helper-address
<ipaddr>|igmp|local-proxy-arp|[nat inside]|{ospf area <id>}routing}| pppoe-max-
segment-site <number>| pppoe-password|pppoe-service-name|pppoe-username|routing
ipv6 {address <ipv6-address> link-local | [<ipv6-prefix>/<prefix-length> | eui-64]|
mld [snooping]}
mtu
multimode-auth
no ...
operstate up
option-82 mac essid
shutdown
suppress-arp
Description
This command configures a VLAN interface.
Syntax
This command includes the following configuration parameters
Parameter Description Range Default
vlan VLAN ID number. 1-4094 —
bandwidth-contract Name of the bandwidth contract to be applied to this VLAN
interface. When applied to a VLAN, the contract only limits
multicast traffic and does not affect other data. Use the aaa
bandwidth-contract command to configure a bandwidth
contract.
——
bcmc-optimization Enables broadcast and multicast traffic optimization to
prevent flooding of broadcast and multicast traffic on
VLANs.
——
description String that describes this interface. — 802.1Q VLAN
ip Configures IPv4 for this interface.
address Configures the IP address for this interface, which can be
one of the following:
<ipaddr> <netmask>
 dhcp-client: use DHCP to obtain the IP address
 internal: IP address allocated from the Remote Node
Profile.
 pppoe: use PPPoE to obtain the IP address
——
helper-address IP address of the DHCP server for relaying DHCP requests
for this interface. If the DHCP server is on the same
subnetwork as this VLAN interface, you do not need to
configure this parameter.
——
igmp Enables IGMP and/or IGMP snooping on this interface. — —
local-proxy-arp Enables local proxy ARP. — —
nat inside Enables source network address translation (NAT) for all
traffic routed from this VLAN.
——