Reference Guide

Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide local-userdb-guest add | 371
By default, the internal database in the master controller is used for authentication. Issue the aaa authentication-
server internal use-local-switch command to use the internal database in a local controller; you then need to add
user accounts to the internal database in the local controller.
Example
The following command adds a guest user in the internal database with an automatically-generated username
and password:
(host) #local-userdb-guest add generate-username generate-password expiry none
The following information is displayed when you enter the command:
GuestConnect
Username: guest-5433352
Password: mBgJ6764
Expiration: none
Related Commands
Command History
Introduced in ArubaOS 3.4.
Command Information
Command Description Mode
show local-userdb-
guest
Use this command to show the parameters displayed
in the output of this command.
Enable and Config modes
show local-userdb Use this command to show the parameters displayed
in the local-userdb command.
Enable and Config modes
Platform License Command Mode
Available on all platforms Available in the base operating system. The
role parameter requires the PEFNG license.
Enable and config modes on master
controllers.