Reference Guide

Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide provision-ap | 439
Command History
Command Information
Release Modification
ArubaOS 3.0 Command introduced
ArubaOS 3.2 Introduced support for the mesh parameters, additional antenna parameters, and AP
location parameters.
ArubaOS 3.4 Introduced support for the following parameters:
 installation
 mesh-sae
 set-ikepsk-by-addr
 usb-dev
 usb-dial
 usb-init
 usb-passwd
 usb-tty
 usb-type
 usb-user
ArubaOS 5.0 The mesh-sae parameter no longer has the sae-default option. Use the sae-disable option
to return this parameter to its default disabled setting.
ArubaOS 6.0 The uplink-vlan parameter was introduced.
ArubaOS 6.1 The following new parameters were introduced for provisioning IPv6 APs:
 dns-server-ip6
 ip6addr
 ip6prefix
 gateway6
Platforms Licensing Command Mode
All platforms, except for the parameters
noted in the Syntax table.
Base operating system, except for the
parameters noted in the Syntax table.
Config mode on master controllers