Reference Guide

472 | rf dot11g-radio-profile Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide
rf dot11g-radio-profile
rf dot11g-radio-profile <profile>
am-scan-profile <profile-name>
arm-profile <profile>
beacon-period <milliseconds>
beacon-regulate
cap-reg-eirp <cap-reg-eirp>
channel <num|num+|num->
channel-reuse {static|dynamic|disable}
channel-reuse-threshold
clone <profile>
csa
csa-count <number>
disable-arm-wids-function
dot11b-protection
dot11h
high-throughput-enable
ht-radio-profile <profile>
interference-immunity
maximum-distance <maximum-distance>
mgmt-frame-throttle-interval <seconds>
mgmt-frame-throttle-limit <number>
mode {ap-mode|am-mode|spectrum-mode}
no ...
radio-enable
slb-mode channel|radio
slb-threshold
slb-update-interval <secs>
spectrum-load-bal-domain
spectrum-load-balancing
spectrum-monitoring
spectrum-profile
tpc-power <tpc-power>
tx-power <dBm>
Description
This command configures AP radio settings for the 2.4 GHz frequency band, including the Adaptive Radio
Management (ARM) profile and the high-throughput (802.11n) radio profile.
Syntax
This command includes the following configuration parameters.
Parameter Description Range Default
<profile> Name of this instance of the profile. The name must be 1-63
characters.
— “default”
am-scan-profile
<profile-name>
Configure an Air Monitor (AM) scanning profile. — —
arm-profile Configures Adaptive Radio Management (ARM) feature.
See “rf arm-profile” on page 461.
— “default”
beacon-period Time, in milliseconds, between successive beacon
transmissions. The beacon advertises the AP’s presence,
identity, and radio characteristics to wireless clients.
60 (minimum) 100
milliseconds