Reference Guide

Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide show aaa authentication dot1x | 503
Related Commands
Command History
Command Information
Enforce Suite-B 192 bit security
level Authentication
Shows if Suite-B 192 bit or more security level authentication
enforcement is enabled or disabled.
Token Caching If this feature enabled (and EAP-GTC is configured as the inner EAP
method), token caching allows the controller to cache the username
and password of each authenticated user.
Token Caching Period Timeout period, in hours, for the cached information.
CA-Certificate Name of the CA certificate for client authentication loaded in the
controller.
Server-Certificate Name of the Server certificate used by the controller to authenticate
itself to the client.
TLS Guest Access Shows if guest access for valid EAP-TLS users is enabled or disabled.
TLS Guest Role User role assigned to EAP-TLS guest.
Ignore EAPOL-START after
authentication
If enabled, the controller ignores EAPOL-START messages after
authentication.
Handle EAPOL-Logoff Shows if handling of EAPOL-LOGOFF messages is enabled or disabled.
Ignore EAP ID during negotiation If enabled, the controller will Ignore EAP IDs during negotiation.
WPA-Fast-Handover Shows if WPA-fast-handover is enabled or disabled. This feature is only
applicable for phones that support WPA.
Disable rekey and reauthentication
for clients on call
Shows if the rekey and reauthentication features for voice-over-WLAN
clients has been enabled or disabled.
Check certificate common name
against AAA server
If enabled, this parameter verifies that the certificate's common name
exists in the server. This parameter is disabled by default dot1x profiles.
Command Description Mode
aaa authentication
dot1x
If you do not yet have any 802.1x authentication profiles
defined, use the command aaa authentication
dot1x to configure your 802.1x profiles.
Config mode
Version Description
ArubaOS 3.0 Command introduced.
ArubaOS 6.1 The Check certificate common name against AAA server, Enforce Suite-b-128 and Enforce
Suite-b-192 parameters were introduced.
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master or local
controllers
Parameter Value