Reference Guide

Table Of Contents

Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide show aaa authentication wispr | 523

Related Commands

Command History

This command was introduced in ArubaOS 3.4.1.

Command Information

Logon wait minimum wait If the controller’s CPU utilization has surpassed the Login wait CPU utilization

threshold value, the Logon wait minimum wait parameter defines the minimum

number of seconds a user has to wait to retry a login attempt. Range: 1-10

seconds. Default: 5 seconds.

Logon wait maximum wait If the controller’s CPU utilization has surpassed the logon wait CPU utilization

threshold value, the Logon wait maximum wait parameter defines the

maximum number of seconds a user has to wait to retry a login attempt. Range:

1-10 seconds. Default: 10 seconds.

WISPr Location-ID E.164 Area

Code

The E.164 Area Code in the WISPr Location ID.

WISPr Location-ID E.164 Country

Code 1

The 1-3 digit E.164 Country Code in the WISPr Location ID.

WISPr Location-ID ISO Country

Code

The ISO Country Code in the WISPr Location ID.

WISPr Location-ID SSID/Zone The SSID/network name in the WISPr Location ID.

WISPr Location Name A name identifying the hotspot location. If no name is defined, the default ap-

name is used.

WISPr Operator Name A name identifying the hotspot operator.

Command Description Mode

aaa authentication

wispr

Configure WISPr authentication values on your controller. Config mode on master or local

controllers.

Platforms Licensing Command Mode

All platforms Base operating system Enable or Config mode on master or local

controllers

Parameter Description