Reference Guide

Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide show aaa derivation-rules | 541
Related Commands
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Operation This is the match method by which the string in Operand is matched with the attribute value
returned by the authentication server.
 contains – The rule is applied if and only if the attribute value contains the string in
parameter Operand.
 starts-with – The rule is applied if and only if the attribute value returned starts with the
string in parameter Operand.
 ends-with – The rule is applied if and only if the attribute value returned ends with the
string in parameter Operand.
 equals – The rule is applied if and only if the attribute value returned equals the string in
parameter Operand.
 not-equals – The rule is applied if and only if the attribute value returned is not equal to the
string in parameter Operand.
 value-of – This is a special condition. What this implies is that the role or VLAN is set to
the value of the attribute returned. For this to be successful, the role and the VLAN ID
returned as the value of the attribute selected must be already configured on the
controller when the rule is applied.
Operand This is the string to which the value of the returned attribute is matched.
Action This parameter identifies whether the rule sets a server group role (set role) or a VLAN (set
vlan).
Value Sets the user role or VLAN ID to be assigned to the client if the condition is met.
Total Hits Number of times the rule has been applied since the last server reboot.
New Hits Number of times the rule has been applied since the show aaa derivation-rules command was
last issued.
Description This optional parameter describes the rule. If no description was configured then it does not
appear when you view the User Table.
Command Description Mode
aaa derivation-rules Use aaa derivation-rules to define the parameters
displayed in the output of this show command.
Config mode
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master or local
controllers
Parameter Description