Reference Guide

Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide show aaa profile | 549
Related Commands
Command History
This command was introduced in ArubaOS 3.0.
Command Information
RFC 3576 server IP address of a RADIUS server that can send user disconnect and
change-of-authorization messages, as described in RFC 3576.
User derivation rules Name of the user derivation rule profile.
Wired to Wireless Roaming Shows whether Wired to Wireless Roaming is Enabled or Disabled.
SIP authentication role For controllers with an installed PEFNG license, this parameter displays
the configured role assigned to a session initiation protocol (SIP) client
upon registration.
device type classification Shows if the device identification feature is enabled or disabled. When
devtype-classification parameter is enabled, the output of the show
user and show user-table commands shows each client’s device type, if
that client device can be identified.
enforce DHCP When this option is enabled, clients must complete a DHCP exchange
to obtain an IP address. Best practices are to enable this option when
you use the aaa derivation-rules command to create a rule with the
DHCP-Option rule type. This parameter is disabled by default.
Command Description Mode
aaa profile Use the command aaa profile to define AAA profiles. Config mode
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master or local
controllers
Parameter Description