Reference Guide

Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide show aaa state configuration | 559
The output of the show aaa state configuration command includes the following parameters:
Parameter Description
Switch IP IP address of the local controller.
Master IP IP address of the master controller.
Switch Role Role assigned to the controller on which you issued the show aaa state command.
Current/Max/Total IPv4 Users Current number of IPv4 users on the controller/Maximum number of IPv4 users that
can be assigned to the controller at any time/Total number of IPv4 users that have
been assigned to the controller since the last controller reboot.
Current/Max/Total IPv6 Users Current number of IPv6 users on the controller/Maximum number of IPv6 users that
can be assigned to the controller at any time/Total number of IPv6 users that have
been assigned to the controller since the last controller reboot.
Current/Max/Total Users Current number of users on the controller/Maximum number of users that can be
assigned to the controller at any time/Total number of users that have been
assigned to the controller since the last controller reboot.
Current/Max/Total Stations Current number of stations registered with the controller/Maximum number of
stations that can be registered with the controller at any time/Total number of
stations that have registered the controller since the last controller reboot.
Captive Portal Users Number of current users authenticated via captive portal.
802.1x Users Number of current users authenticated via 802.1x authentication.
VPN Users Number of current users authenticated via VPN authentication.
MAC Users Number of current users authenticated via MAC authentication.
Stateful 802.1x Users Number of current users authenticated via stateful 802.1x authentication.
Tunneled users Number of stations in tunneled forwarding mode, where 802.11 frames are tunneled
to the controller using generic routing encapsulation (GRE).
Configured user roles Number of configured user roles.
Configured session ACL Number of configured session ACLs.
Configured destinations Number of destinations configured using the netdestination command.
Configured services Number of service aliases configured using the netservice command.
Configured Auth servers Number of configured authentication servers.
Auth server in service Number of authentication servers currently in service.
Radius server timeouts Number of times the RADIUS server did not respond to the authentication request.
Web Total number of captive portal authentications or authentication failures since the
last controller reset.
MAC Total number of MAC authentications or authentication failures since the last
controller reset.
VPN Total number of VPN authentications or authentication failures since the last
controller reset.
802.1x Total number of 802.1x authentications or authentication failures since the last
controller reset.
Krb Total number of Kerberos authentications or authentication failures since the last
controller reset.
RadAcct Total number of RADIUS accounting verifications or accounting failures since the
last controller reset.