Reference Guide

Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide show ap arm state | 597
show ap arm state
show ap arm state [ap-name <ap-name>|dot11a|dot11g|ip-addr <ip-addr>]
Description
Display Adaptive Radio Management (ARM) information for an individual AP’s neighbors, or show all available
data for any neighboring AP using an 802.11a or 802.11g radio type.
Syntax
Usage Guidelines
The output of the show ap arm state command shows 802.11a and 802.11g information for all APs. Include an AP
name or IP address to show data for just a single AP, or use the dot11a or dot11g keywords to show data for all APs
using that radio type.
Examples
The output of this command shows 802.11a information for all neighboring APs.
The output of this command includes the following information
Parameter Description
ap-name <ap-name> Show aggregate ARM Neighbor Information for a specific AP.
dot11a Show aggregate ARM Neighbor Information for all APs using an 802.11a radio.
dot11g Show aggregate ARM Neighbor Information for all APs using an 802.11g radio.
ip-addr <ip-addr> Show aggregate ARM Neighbor Information for a AP with a specific IP address by entering its
IP address in dotted-decimal format.
Column Description
Name Name of an AP.
IP address IP address of an AP.
SNR Signal-to-noise (SNR) ratio. SNR is the power ratio between an information signal and the
level of background noise.
Assignment The AP’s current channel assignment.
(host)# show ap arm state
show ap arm state ap-name AP49
AP-1249:10.100.139.233:52:21:26-Edge:disable : Client Density:13
Neighbor Data
-------------
Name IP Address SNR Assignment Neighbor Density
---- ---------- --- ---------- ----------------
AP42 10.100.139.249 41 52/21 13/17/100/76
AP09 10.100.139.224 22 56/21 3/5/23/60
AP48 10.100.139.241 36 60/21 9/11/69/81