Reference Guide

604 | show ap authorization-profile Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide
show ap authorization-profile
show ap authorization-profile [<profile-name>]
Description
This command shows information for AP authorization profiles.
Syntax
Usage Guidelines
The AP authorization profile specifies which configuration should be assigned to a remote AP that has been
provisioned but not yet authenticated at the remote site. By default, these yet-unauthorized APs are put into the
temporary AP group authorization-group and assigned the predefined profile NoAuthApGroup. This
configuration allows the user to connect to an unauthorized remote AP via a wired port then enter a corporate
username and password. Once a valid user has authorized the AP and the remote AP is marked as authorized on
the network. The remote AP will then download the configuration assigned to that AP by it's permanent AP
group.
Issue this command without the <profile-name> option to display the entire AP authorization profile list,
including profile status and the number of references to each profile. Include a profile name to display the
authorization group defined for that profile.
Examples
The following example lists all AP authorization profiles. The References column lists the number of other
profiles with references to that authorization profile, and the Profile Status column indicates whether the profile
is predefined. User-defined AP authorization profiles will not have an entry in the Profile Status column.
To display the authentication group for an individual profile, include the <profile> parameter. The example
below shows the profile details for the AP authorization profile Default.
Parameter Description
<profile-name> The name of an an existing AP authorization profile.
(host) #show ap authorization-profile
AP Authorization profile List
-----------------------------
Name References Profile Status
---- ---------- --------------
Noauthprofile 1
default 2 Predefined (editable)
Total:2
(host) #show ap authorization-profile default
AP Authorization profile "default" (Predefined (editable))
----------------------------------------------------------
Parameter Value
--------- -----
AP authorization group NoAuthApGroup