Reference Guide

Table Of Contents
676 | show ap details Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide
Command History
Command Information
Release Modification
ArubaOS 3.0 Command introduced
ArubaOS 3.2 Introduced support for mesh parameters, additional antenna parameters, and AP location
parameters.
ArubaOS 3.4 Introduced support for the following parameters:
installation
mesh-sae
set-ikepsk-by-addr
usb-dev
usb-dial
usb-init
usb-passwd
usb-tty
usb-type
usb-user
ArubaOS 5.0 The mesh-sae parameter no longer displays the sae-default setting if the parameter is
disabled. Only the sae-disable option indicates that this parameter is currently in its default
disabled state.
ArubaOS 6.1 The parameter ip6-addr was added to show data for an IPv6 AP.
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master controllers