Reference Guide

Table Of Contents
Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide show ap enet-link-profile | 677
show ap enet-link-profile
show ap enet-link-profile [<profile>]
Description
Show a list of all Ethernet Link profiles.
Usage Guidelines
Include a profile name to display details for the specified Ethernet Link Profile, or omit the <profile> parameter
to display a list of all Ethernet Link profiles.
Example
This command shows the speed of the Ethernet interface and the current duplex mode for the ethernet link
profile “default”:
The output of this command includes the following parameters:
Related Commands
Command History
Introduced in ArubaOS 3.0.
Command Information
Parameter Description
Speed The speed of the Ethernet interface. This value can be either 10 Mbps, 100
Mbps, 1000 Mbps (1 Gbps), or auto (auto-negotiated).
Duplex The duplex mode of the AP’s Ethernet interface. This value can be either full,
half, or auto (auto-negotiated).
Command Description Mode
ap enet-link-profile This command configures an AP Ethernet link profile. Config mode
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master controllers
(host) #show ap enet-link-profile default
AP Ethernet Link profile "default"
----------------------------------
Parameter Value
--------- -----
Speed auto
Duplex auto