Reference Guide

Table Of Contents
682 | show ap image version Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide
Command History
Introduced in ArubaOS 3.0.
Command Information
Image Load Status Current status of the AP following an upgrade.
Done: This status indicates that the controller reset after the upgrade was performed, or the
upgrade was performed after the AP first registered with the controller.
Completed: The AP was updated after it was registered to the controller, and after the
controller’s last reset. If AP shows a status of completed, it will also display the time it took it
update that AP.
In progress: The AP is currently updating its image.
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master controllers
Column Description