Reference Guide

Table Of Contents
Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide show ap spectrum device-history | 761
Example
The output of this example shows details for fixed-frequency video devices seen by a spectrum monitor or hybrid
AP radio.
The output of this command includes the following information:
(host)# show ap spectrum device-history ap-name ap123 freq-band 5ghz type video
Non-Wifi Device History Table
-----------------------------
Type ID Cfreq(Khz) Bandwidth(KHz)Channels-affected Signal-strength Duty-cycle Add-time Delete-time
---- -- ----- --------- ----------------- --------------- ---------- -------- -----------
Video 1 5745312 6000 149 76 99 2010-05-16 20:07:08 -
Video 2 5745312 6000 149 75 99 2010-05-16 20:07:39 2010-05-17 16:50:24
Video 3 5745312 6000 149 74 99 2010-05-16 20:20:25 2010-05-16 20:20:36
Video 4 5745312 6000 149 76 99 2010-05-16 20:32:44 2010-05-16 20:33:07
Video 5 5742031 6000 149 79 99 2010-05-16 20:33:43 2010-05-16 20:33:53
Video 6 5745312 6000 149 75 99 2010-05-16 20:34:08 2010-05-16 20:34:2
Column Description
Type Device type. This parameter can be any of the following:
audio FF (fixed frequency)
bluetooth
cordless base FH (frequency hopper)
cordless phone FF (fixed frequency
cordless network FH (frequency hopper)
generic FF (fixed frequency
generic FH (frequency hopper)
generic interferer
microwave
microwave inverter
video
xbox
NOTE: For additional details about non-Wi-Fi device types shown in this table, see “Non-Wi-Fi
Interferers” on page 760
ID ID number assigned to the device by the spectrum monitor or hybrid AP radio. Spectrum monitors and
hybrid APs assign a unique spectrum ID per device type.
Cfreq Center frequency of the signal sent from the device.
Bandwidth Channel bandwidth used by the device, in Kilohertz.
Channels-affected Radio channels affected by the wireless device, in Kilohertz.
Signal-strength Strength of the signal sent from the device, in dBm.
Duty-cycle Device duty cycle. This value represents the percent of time the device broadcasts on the specified
channel or frequency.
Add-time Time at which the device was first detected.
Delete-time Time at which the device was aged out.