Reference Guide

Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide show ap vlan-usage | 783
show ap vlan-usage
show ap vlan-usage [{ap-name <ap-name>}|{bssid <bssid>|{essid <essid>|{ip-addr <ip-
addr>}]
Description
Show the numbers of clients on each vlan.
Syntax
Examples
The output of this command displays the VLAN Usage table.
The output of this command includes the following information:
Command History
Introduced in ArubaOS 3.0.
Command Information
Parameter Description
ap-name <ap-name> Show VLAN data for an AP with a specific name.
bssid <bssid> Show VLAN data for a specific Basic Service Set Identifier (BSSID) on an AP. The Basic
Service Set Identifier (BSSID) is usually the AP’s MAC address.
essid <essid> Show VLAN data for a specific Extended Service Set Identifier (ESSID). An Extended Service
Set Identifier (ESSID) is a alphanumeric name that uniquely identifies a wireless network. If
the name includes spaces, you must enclose the ESSID in quotation marks.
ip-addr <ip-addr> Show VLAN data for an AP with a specific IP address by entering an IP address in dotted-
decimal format.
Column Description
VLAN ID ID number of the wireless VLAN
Clients Number of clients currently using the specified VLAN.
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master controllers
(host) #show ap vlan-usage
VLAN Usage Table
----------------
VLAN ID Clients
------- -------
64 1
65 32
66 44