Reference Guide

820 | show crypto map Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide
show crypto map
show crypto ipsec map
Descriptions
This command displays the IPsec map configurations.
Syntax
Usage Guidelines
Use the show crypto map command to view configuration for global, dynamic and default map configurations.
Examples
The command show crypto map shows statistics for the global, dynamic and default maps.
Parameter Description
map Show the IKE Aggressive group name.
(host) #show crypto map
Crypto Map "GLOBAL-MAP" 10000 ipsec-isakmp
Crypto Map Template"default-dynamicmap" 10000
IKE Version: 1
lifetime: [300 - 86400] seconds, no volume limit
PFS (Y/N): N
Transform sets={ default-transform, default-aes }
Crypto Map "GLOBAL-IKEV2-MAP" 10000 ipsec-isakmp
Crypto Map "default-local-master-ipsecmap" 9999 ipsec-isakmp
Crypto Map Template"default-local-master-ipsecmap" 9999
IKE Version: 1
lifetime: [300 - 86400] seconds, no volume limit
PFS (Y/N): N
Transform sets={ default-ml-transform }
Peer gateway: 10.4.62.9
Interface: VLAN 0
Source network: 172.16.0.254/255.255.255.255
Destination network: 10.4.62.9/255.255.255.255
Pre-Connect (Y/N): Y
Tunnel Trusted (Y/N): Y
Forced NAT-T (Y/N): N